Tuesday, July 2, 2013

Lost: One head from the herd | 8 Comments - Click Here :

This:

 Plus a whole bottle of this:

Leisurely spilled all over; results in this:

 Luckily, the rest of the herd escaped the carnage:

Cowboy Up and continue onward...
8 Comments - Click Here :
  1. Definite bummer! Looks like no way to salvage.

    ReplyDelete
  2. Ouch and other terms Durn can you set it on the ground and store hay in it?

    ReplyDelete
    Replies
    1. Actually, not a bad idea Tom. At least I could re-purpose the car body. Thanks!

      Delete
  3. If these are PBL cars you can contact Mary Ann for new parts. (Even if they are OMI kits). I may have some but I'd have to dig around and see. If you need parts for BLW kits get on the Sn3 Groups and contact Paul Vaughn who now owns the line.

    I hate the bottles these people use! I spilled a whole bottle of Micro Scale Red decal solvent yesterday. The only bottle I had. I need to make a proper stand for these - block of 2x4 with a hole drilled in it. Either that or come up with a bottle that does not tip so easy. It is a conspiracy I tell ya - sos you will spill bottles and have to buy more. Grrrrrrrrrrrrrrrr!!!

    ReplyDelete
    Replies
    1. Welcome back brother d!
      I will contact Paul for the needed parts. Thanks!
      I think Patrick is fixing me up with the cure to any future spilled bottle ills ( :

      Delete
  4. I just checked. I do have a pretty much complete SUF for a PBL or OMI kit but these cars are obviously BLW. Icould probably fix you up with parts for the car besides the frame itself but I would encourage you to contact Paul. My stah of Needle beams are important because these parts breap pretty regualarly and it is always a good idea to have spares. When you contact Paul order a bunch of these if you can. Probably the most critical part you "lost".

    Derrell

    ReplyDelete